 |
Conductor: Flexible Tin Plated Copper, Up to 18 AWG with Steel Reinforcing Strands
Operating Temperature: -55°C to 75°C
Operating Voltage: 600 Volts
Insulation: Extruded Polyethlene, Upto 12 AWG with a Clear Polyamide Jacket
Jacket: Arctic Grade Polychloroprene (Neoprene)
Shielding: Tin Plated Copper Braids with a Minimum 85% Coverage
 Download pdf of this page
|
| |
Applications
This lightweight, high temperature airframe and avionics wires utilize an insulation of cross-linked, modified ethylene tetrafluoreothylene copolymer (ETFE). The insulation resists high PH cleaning fluids, fuels, lubricating oils, and many other chemicals. The wires can withstand temperature test extremes ranging from cold bend (-65°C) through aging (300°C) for 7 hours. These wires are a mechanically tough, flame retardant and weight saving solution to many aerospace applications.
|
Cable Specifications
Type Designation - The type designation shall be identified by a combination of digits and letters.
Cable types shall be as specified. |
S
Cable Shield |
16
No. of conductors |
1375
Nominal Cable Diameter |
S
Conductor Shield |
C
Coaxial |
| Cable Shield - When S precedes the number, an overall shield under the sheath is required. |
| Conductor Shield - When the letter S follows the diameter, individual conductor shields are required. |
| Coaxial Conductors - The letter C at the end of the type designation denotes that the cable contains 1 or more coaxial conductors. |
| MIL-DTL-13777 /1 - Cables with 1 - 5 Conductors |
| MIL-DTL-13777 /2 - Cables with 6 - 15 Conductors |
| MIL-DTL-13777 /3 - Cables with 16 - 20 Conductors |
| MIL-DTL-13777 /4 - Cables with 21 - 32 Conductors |
| MIL-DTL-13777 /5 - Cables with 33 - 52 Conductors |
| MIL-DTL-13777 /6 - Cables with 60 - 78 Conductors |
The above part numbers represent the more popular constructions. Other designs are available upon request.
All products are manufactured to meet RoHS compliance. For exceptions, please contact our sales department at 1-866-303-9473.
Applications
These ground support cables are designed for interconnection of mobile or portable complex weapon systems such as fire control instruments, generator units, radar devices, cimmunications gear, guided missiles and artillery. They are for use where oil, ozone and weather resistance are of major importance. The cables may be used on bare ground, in shallow trenches, or swampy environments. These cables will survive severe bending, twisting and impacts over the rated operating temperature range.
|
Questions About Military & Mil Spec Cables?
|
